home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Night Owl 6
/
Night Owl's Shareware - PDSI-006 - Night Owl Corp (1990).iso
/
033a
/
hsltg25q.zip
/
HSLTGQ.TXT
< prev
Wrap
Text File
|
1991-12-04
|
3KB
|
70 lines
=============== THE == GRAPHIX == HIDEAWAY == NETWORK =====================
Presents:
HSLink for Telegard 2.5q Beta or Higher!
===========================================================================
Have you ever wondered what it would be like to have Bi-Modem but better?
With use of this TXT file and the other files included in this ZIP HSLink
will be at your fingertips.
Files in this ZIP:
Name: Size: (Bytes) Date:
============ ========= ========
HSCONFIG.EXE 45,312 11-26-91
HSLINK.EXE 40,740 11-26-91
HSLINK.DOC 87,557 11-26-91
HSLINK.CFG 16 12-04-91
HSLTGQ.TXT 2,608 12-05-91
README.TGH 1,057 11-19-91
If any of these files have been tampered with contact Aj Haines through
TeleNet Canada (TNC) or contact him at The Graphix HideAway BBS Network.
[416]622-1737.
What to do:
===========
First put the HSLink files in the C:\xx (Your Telegard 2.5q Beta directory).
Next run HSCONFIG.EXE and configure HSLink to your system's settings. Using
any simple (Or complex) text editor you may have handy edit the file:
HSLINK.CFG. It should look something like this after running HSCONFIG:
-P(Your COM Port)
-PI(If you have an iregular COM port IRQ location)
-UC:(The directory where your uploads go to)
This command should be inserted on the FIRST line of this file:
-K (Opens the COM port at the default baud rate)
After that load up Telegard and execute the <X> Protocol Editor option. Insert
a new protocol into the list already contained in your PROTOCOL.DAT file.
Next:
1: <!> Make protocol active
2: <1> Enter Key to be used and enter new description for HSLink.
3: <2> Enter new access required (Only if appliciable).
4: <3> Enter the name of the Temp. Log (Eg. DSZTEMP.LOG)
5: <4> Enter the upload log name (Eg. HSLINKU.LOG)
6: <4> Enter the download log name (Eg. HSLINKD.LOG)
7: Depress <5> then depress <U>, then <E> for external command, then
this command line:
HSLINK -P(Your COM Port) -NU %3 %4 %5 %6 %7 %8 %9 <ENTER>
8: Depress <5> once again this time using the <D> for downloads, <E> once
again and then this command line:
HSLINK -P(Your COM Port) <ENTER>
9: Exit back to the WFC menu.
10: Enjoy HSLink installed into Telegard 2.5q Beta!
All rights reserved by: Aj Haines - The Graphix HideAway BBS [416]622-1737.
Call today for ANY Telegard Support. Written by: Aj Haines & Marc Ackley.
(c)1991.